Difference between revisions of "File:GCC LaserPro Mercury Full.jpeg"

Latest revision as of 19:51, 13 April 2019

This picture shows the GCC LaserPro Mercury 30 watt laser engraver located at the EMS HQ.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	19:51, 13 April 2019		4,032 × 3,024 (2.48 MB)	Esden (talk \| contribs)	This picture shows the GCC LaserPro Mercury 30 watt laser engraver located at the EMS HQ.

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone XR
Exposure time	1/40 sec (0.025)
F Number	f/1.8
ISO speed rating	320
Date and time of data generation	19:27, 12 April 2019
Lens focal length	4.25 mm
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Photos 4.0
File change date and time	19:27, 12 April 2019
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	19:27, 12 April 2019
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.3220435193945
APEX aperture	1.6959938128384
APEX brightness	0.82512369839746
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, auto mode
DateTimeOriginal subseconds	653
DateTimeDigitized subseconds	653
Supported Flashpix version	0,100
Color space	Uncalibrated
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	26 mm
Scene capture type	Standard
IIM version	2