Difference between revisions of "Laser Master"
Laser Master
Jump to navigation
Jump to search
(Updated status, added rough Z depth.) |
m (typo) |
||
| Line 25: | Line 25: | ||
It works! |
It works! |
||
| − | NOTE: There |
+ | NOTE: There are NO stop switches installed, so it will gladly tear through the bed, or really try hard to run itself off the rails if you let it. And if you are pinned between it and an edge, expect an emergency room visit at the least. |
The X,Y& Z axis are moving. |
The X,Y& Z axis are moving. |
||
Revision as of 06:06, 6 August 2024
These are our collection of notes on the Laser CNC Master Restoration Project.
Specs:
- Make: Cam Tech
- Model: LaserMaster CM155
- Year:
- Working Area: X?, Y?, Z~6"
Links:
- http://www.sawmillcreek.org/showthread.php?125009-Camtech-LaserMaster-Users
- http://www.dataworks.gr/old/uk/products/specif.htm
- http://www.cnczone.com/forums/commercial-cnc-wood-routers/172133-cnc.html
- http://www.laserform.ca/pdf/CAMTECH_brochure_email.pdf
- LaserCut 5.x Archive
- http://www.co2-lasers.com/blog/wp-content/uploads/2012/10/MPC6535-Software.rar
- Our Copy: MPC6535-Software.rar
- Note that if you extract this under Linux you will get many duplicate file names. Presumably, these are the 32, and 64 bit system files.
- Hardware Manual: MPC6535-Hardware_Manual.pdf
- Laser Manual: Operators_Manual_48_Series-1.pdf
- Software Manual: LaserCut5.3-Software_Manual-V1.6.pdf
-- Main.ClifCox - 11 May 2016
Status:
2024-08-05: It works!
NOTE: There are NO stop switches installed, so it will gladly tear through the bed, or really try hard to run itself off the rails if you let it. And if you are pinned between it and an edge, expect an emergency room visit at the least.
The X,Y& Z axis are moving. The Spindle control is working UGS works well with the system.
- tickle_pulse.zip: Arduino code for laser PWM with tickle pulse.