Difference between revisions of "Laser Master"

From Eugene Maker Space
Laser Master
Jump to navigation Jump to search
(Added pic of CNC, as well as UGS icon)
(Framework for future entries and overview of process, CNC tutorial links from Discord)
Line 9: Line 9:
 
* Year:
 
* Year:
 
* Working Area: X?, Y?, Z~6"
 
* Working Area: X?, Y?, Z~6"
  +
  +
==Process Overview:==
  +
* Design your project in Easel (or still untested, Carbide Create)
  +
** Export gcode file as .nc
  +
* Setup Table
  +
** Waste Board
  +
** Material onto Waste Board
  +
** Install Appropriate Mill end (bit)
  +
* Launch Software
  +
** Reset Zero as safety
  +
** Load .nc file
  +
** Confirm dims with visualizer
  +
** Move router into position
  +
** Reset Zero For reals this time
  +
** Create Drill locating hole
  +
** Return to Ideal Zero
  +
  +
  +
==Setting Up CNC:==
  +
  +
==Using UGS==
  +
This is the software that takes your gcode file and feeds it to the router line by line in a way that it will understand it.
  +
Launch UGS by double clicking this icon:
  +
<br>
  +
[[File:2024 08 desktop.jpg|100px]]
  +
  +
New to Linux? Run the software with this option:
  +
<br>
  +
[[File:2024 08 launch window.jpg|450px]]
  +
  +
  +
   
   
   
 
== Links: ==
 
== Links: ==
  +
  +
* https://www.youtube.com/watch?v=XOcqlAb7ZLM&t=0s
  +
* https://www.youtube.com/watch?v=UU80JLGsEAs
  +
* https://www.youtube.com/watch?v=bCUHsJ4Ktj0
  +
* -
 
* http://www.sawmillcreek.org/showthread.php?125009-Camtech-LaserMaster-Users
 
* http://www.sawmillcreek.org/showthread.php?125009-Camtech-LaserMaster-Users
 
* http://www.dataworks.gr/old/uk/products/specif.htm
 
* http://www.dataworks.gr/old/uk/products/specif.htm

Revision as of 06:51, 6 August 2024


2024 08 30 cnc bed.jpg

These are our collection of notes on the Laser CNC Master Restoration Project.

Specs:

  • Make: Cam Tech
  • Model: LaserMaster CM155
  • Year:
  • Working Area: X?, Y?, Z~6"

Process Overview:

  • Design your project in Easel (or still untested, Carbide Create)
    • Export gcode file as .nc
  • Setup Table
    • Waste Board
    • Material onto Waste Board
    • Install Appropriate Mill end (bit)
  • Launch Software
    • Reset Zero as safety
    • Load .nc file
    • Confirm dims with visualizer
    • Move router into position
    • Reset Zero For reals this time
    • Create Drill locating hole
    • Return to Ideal Zero


Setting Up CNC:

Using UGS

This is the software that takes your gcode file and feeds it to the router line by line in a way that it will understand it. Launch UGS by double clicking this icon:
2024 08 desktop.jpg

New to Linux? Run the software with this option:
2024 08 launch window.jpg




Links:

-- Main.ClifCox - 11 May 2016

Status:

2024-08-05: It works!

NOTE: There are NO stop switches installed, so it will gladly tear through the bed, or really try hard to run itself off the rails if you let it. And if you are pinned between it and an edge, expect an emergency room visit at the least.

The X,Y& Z axis are moving. The Spindle control is working UGS works well with the system.