Difference between revisions of "Laser Master"

From Eugene Maker Space
Laser Master
Jump to navigation Jump to search
Line 79: Line 79:
 
-- Main.ClifCox - 11 May 2016
 
-- Main.ClifCox - 11 May 2016
   
== Status: ==
+
== Status ==
 
2024-08-05:
 
2024-08-05:
 
It works!
 
It works!

Revision as of 07:01, 6 August 2024


2024 08 30 cnc bed.jpg

These are our collection of notes on the Laser CNC Master Restoration Project.

Specs

  • Make: Cam Tech
  • Model: LaserMaster CM155
  • Year:
  • Working Area: X?, Y?, Z~6"

Process Overview

  • Design your project in Easel (or still untested, Carbide Create)
    • Export gcode file as .nc
  • Setup Table
    • Waste Board
    • Material onto Waste Board
    • Install Appropriate Mill end (bit)
  • Launch UGS Software
    • Reset Zero as safety
    • Load .nc file
    • Confirm dims with visualizer
    • Move router into position
    • Reset Zero For reals this time
    • Create Drill locating hole
    • Return to Ideal Zero
  • Run project
    • Try is in the air first
    • Try it with cheap material second
    • google appropriate speeds & feeds
    • Try it with your final material
    • Stay in shop & keep an eye on the CNC table
      • take this time to help clean & organize the shop :D
  • Warp up
    • Clean up CNC area
    • Remove project
    • vacuum area
    • Reset CNC for next user

Design your Project

(stem)

Setup Table

(stem)

Launch UGS Software

This is the software that takes your gcode file and feeds it to the router line by line in a way that it will understand it. Launch UGS by double clicking this icon:
2024 08 desktop.jpg

New to Linux? Run the software with this option:
2024 08 launch window.jpg (stem)

Run project

(stem)

Wrap Up

(stem)


Links

-- Main.ClifCox - 11 May 2016

Status

2024-08-05: It works!

NOTE: There are NO stop switches installed, so it will gladly tear through the bed, or really try hard to run itself off the rails if you let it. And if you are pinned between it and an edge, expect an emergency room visit at the least.

The X,Y& Z axis are moving. The Spindle control is working UGS works well with the system.