Project: ‛Doozer’

Error creating thumbnail: Unable to save thumbnail to destination

Yellow-Tagged Tool

Please Ask Before Using

Tool Owner: Karen Englebeck
Chat: @zebragrrl on on Slack
Email: See sticker on machine.

test

🚨 This page is under construction 🚨

Project Status

All off-the-shelf components have been purchased, and have arrived. All components are measured and 3D modelled in SketchUp Make 2016. The 3 axis assemblies have been assembled in SketchUp.

Currently developing a modified 3D model of the tolerances of the aluminum extrusions, that model will help me easily create functional 3D-printed parts that fit properly.

Maximum workspace dimensions seem to be coming in at <(X)305mm, (Y)250mm, (Z)180mm> which is approximately <(X)12in, (Y)11in, (Z)7in>. These are the maximum lengths of the linear rails and bearings. I suspect these lengths will reduce somewhat as the actual gantry is designed.

Project Development History

🔻 Click for info 🔻

Hidden text is revealed!

What the hell is a Doozer?