At the Eugene Makerspace, there are several 3d printers. With 'Luck' (continuous community effort) some of them even work!
Raise3d E2
This is an enclosed, dual extruder, FDM printer with a build area of 330x240x240mm and a max temperature of 300C on the nozzle. Donated by epicycloid.
Slicer Profiles
Make and link to slicer profiles, best hosting location tbd.
Special notes
This printer has an internal HEPA filter, so it might not need to be attached to the ventilation system. To be evaluated as of 12-17-25 Dual extruders can either be used to print two objects at once for faster production, or to do dual material prints. It should be able to print the more garden variety 'engineering' filaments, such as glass fiber stabilized nylon. To be evaluated as of 12-17-25 https://www.raise3d.com/e2/ https://support.raise3d.com/list.html?cid=20&pid=-1 https://www.raise3d.com/ideamaker/ https://www.raise3d.com/download/
Printer XYZ (template)
This is an enclosed FDM printer with a build area of XYZ and a max temperature of A
Slicer Profiles
Make and link to slicer profiles, best hosting location tbd.